Killing time, HKS QSV BOV Installed!!!

Posted by martin on 29 April, 2005 02:26 | Permalink | Engine | Hits (1565)

Just have fun installing this and test it..... the whistle sound does make a lot of fun. :)

 (More)

T.M. Works Ignite REV Installed!!!

Posted by martin on 26 April, 2005 22:50 | Permalink | Engine | Hits (1980)

Yes, I've got this installed on my bug today.

After some road tests I did (around 60km or so), I can felt the unleashed power runs under the wheel. And the usage of petrol is getting well, it helps engine burns the petrol more efficient.

My bug get more 8.5hp in N/A mode, N/A? Is my bug not a turbo bug!? Well, just read the full story then you will know.

Here is the full story about the installation:

 (More)

A'PEXi Auto timer Installed

Posted by martin on 24 April, 2005 23:46 | Permalink | Engine | Hits (1880)

Ok, here is the short description of this product:
The A'PEX Auto Timer allows a vehicle to idle for a preset amount of time after the ignition key has been removed. This prevents hot oil in the engine from solidifying (called "coking") in the oil lines or the bearings of a turbo charger. Proper cool down is essential for a healthy engine, especially if that engine is subjected to the rigors of racing.

 (More)

Samco Silicone VAG 1.8T AWP Intake Hose

Posted by martin on 24 April, 2005 23:28 | Permalink | Engine | Hits (4495)

In ECS website, it says: "This hose replaces the existing hose and metal turbo intake combination and has a reinforced wall and super smooth internal design to ensure that laminar flow rates are maximised. With the original restrictions removed better flow characteristics are achieved which give noticeable gains in power and torque. You will need to plug the extra port if not needed."

Would like to install this by yourself??? Check this excellent DIY instruction made by Lam in newbeetle.org: http://forums.newbeetle.org/showthread.php?s=&threadid=45169

Now, there are more and more Samco silicone hoses in the engine room. :)

PS. AWP one fits on my AWU engine without any problem. It just works fine as the stock one. :)

 (More)

Keep going..... :)

Posted by martin on 19 April, 2005 10:23 | Permalink | General | Hits (1252)

Today, I took the bumper off and would put something new on my car. Hope I can finish this work tomorrow afternoon.

 (More)

1 2  Next»

Categories

Recently...

Archives


Syndicate

Links

© MX's Autosport All rights reserved.
Contact the Owner of the Blog